(516) 629-7164

Garage door repair in Glen Cove, NY

Door stuck halfway? Making a racket? Won't budge at all? Give us a ring. Glen Cove Garage Door brings more than 25 years of hands-on experience to doors all around the harbor. Most days we can be there the same day, with the part already in the truck and the price on paper before a single screw comes out.

Same-day help, Sun–Thu(516) 629-7164
25+ yearsOf hands-on experience
From $79Service visit
3 yearsWarranty, parts & labor
Price firstIn writing, before work

First things first: stay safe

Big bang from the garage, or a door hanging crooked? Put the remote down. Keep the kids, the dog and the car away from under it. Springs and cables are wound tight, so hands off. If the door's down, leave it down. Then call us at (516) 629-7164 and we'll take it from there.

Around town

Garage doors in Glen Cove, house by house

Before it was Glen Cove, this place was Musketa Cove, settled in 1668. The name changed in 1834 and it became a city in 1918. Walk around and you'll spot a garage from just about every one of those chapters.

Over in the Orchard and down by the Landing, garages tend to be small, tucked behind the house, and every so often still wearing their first wooden door. Head toward Dosoris Lane and the big Gold Coast properties and you're into oversized carriage doors, three-bay garages and solid wood that needs serious muscle in the springs. Downtown on Glen Street and School Street it's mostly shop gates out front and roll-up doors out back.

And then there's the harbor. Anywhere near Crescent Beach, Morgan Park or Garvies Point, salty air drifts in off Hempstead Harbor and the Sound pretty much daily. It chews through springs, cables and the brackets at the bottom of the door quicker than folks expect, so for houses near the shore we lean toward coated or galvanized replacement parts.

My spring snapped. Can I still use the opener to get the car out?

Please don't. With the spring gone, that little motor is trying to haul the whole door up by itself, and a double steel door can easily weigh 200 pounds. That's how gears get chewed up and cables pop. Leave the car parked, give us a call, and we'll get it free safely.

Main roads we drive daily

  • Glen Street, Forest Avenue and Brewster Street
  • Glen Cove Avenue and Cedar Swamp Road
  • Dosoris Lane, Crescent Beach Road and the Landing
  • Near the Glen Street and Glen Cove LIRR stations
Price guide

What does garage door repair cost in Glen Cove?

Around Glen Cove, repairs kick off at $79 for us to come out, $129 for a fresh pair of cables, and $189 to replace a torsion spring. You'll have the whole number in writing before we pick up a wrench.

Loud bang, door won't go up? Garage door spring repair

Nine times out of ten it's a snapped spring. We match the new one to what your door actually weighs.

ServiceStarting at
Torsion spring swapfrom $189
Extension spring setfrom $169
Tune-up: balance & lubefrom $99

Clicker does nothing? Garage door opener repair

Openers that hum, click, blink or bounce back. Most makes.

ServiceStarting at
Opener fixfrom $119
Sensor (photo-eye) alignmentfrom $89
Chain opener, supplied & fittedfrom $449

Door crooked or jumped the track? Cable and roller repair

Hands off on this one. A door hanging by one cable can drop.

ServiceStarting at
Cables (both sides)from $129
Roller kitfrom $139
Off-track re-hangfrom $159

Store gate jammed? Rolling gate and commercial door repair

Shop gates, roll-up doors and loading docks.

ServiceStarting at
Commercial call-outfrom $129
Gate spring workfrom $249
Dock door fixfrom $239

Those are the starting numbers for regular-size doors. Bigger, heavier or custom doors run more, same for high-cycle springs. Stack the coupons below on top.

Honest advice

Fix it or replace it? We'll tell you straight

Honestly? Most doors in Glen Cove just need fixing. Here's the gut check we use, and we'll say it to your face too.

Fix it if…

  • It still runs straight and nothing's cracked
  • Just one thing quit: a spring, a cable, a roller
  • It's maybe 15 years old or newer
  • The fix costs under a third of a brand-new door

Replace it if…

  • Panels are split, soft with rot, or rusted clean through
  • It's an old wooden beast nobody can balance anymore
  • It's attached, uninsulated, and the cold comes right in
  • You've been writing us checks three years in a row

If a $189 spring gets you another ten years out of the door, that's what we'll tell you to do. Every time.

The process

What happens after you call

  1. You get a real person

    No press-1-for-this. Tell us what happened or text a pic, and we'll usually know the part right away.

  2. We roll up

    Usually the same day Sunday through Thursday. We'll buzz you when we're on the way so you're not stuck waiting around.

  3. Price before work

    We give the whole door a once-over, then write the price down. Your call. Zero pressure.

  4. Fixed and double-checked

    Door balanced, auto-reverse tested, mess cleaned up, warranty left on the counter.

$10 off1-car spring swapTorsion or extension, your pick
10% offHardware fixesCables, rollers, pulleys and hinges
$20 offBelt-drive openerSupplied and fitted by our crew
$10 offChain-drive openerSupplied and fitted by our crew
FAQ

Questions people ask us before they book

Can you get here today?

Most of the time, yep. Call by early afternoon, Sunday to Thursday, and chances are good we'll be over the same day. Our trucks are stocked for the usual breakdowns, so it's normally a one-trip job.

What hours do you keep?

Sunday through Thursday, 7 in the morning till 7 at night. Fridays we knock off two hours before Shabbat. Saturdays we're closed, and the phone's back on once Shabbat's done.

What's your warranty like?

Three years, parts and labor, whether we fixed your door or put in a new one. Brand-new doors and openers carry the maker's warranty as well.

Is there a fee just to come look?

A service visit starts at $79, and you'll know the full price before we touch a thing. Quotes on new doors, openers and rolling gates don't cost a dime.

Do you go outside Glen Cove?

All the time. Sea Cliff, Glen Head, Glenwood Landing, Locust Valley, Bayville, Oyster Bay, you name it.

What brands do you work on?

Just about anything: Clopay, Amarr, LiftMaster, Genie, Chamberlain, CHI, Wayne Dalton, Craftsman, plus plenty of old-timers with the label long gone.

Request service

Send us your request

Fill this out and it goes straight to us as a text (or an email from a computer). A photo of the door helps us bring the right parts. Prefer to talk?

(516) 629-7164
  • Sunday–Thursday7 to 7
  • FridayTill 2 hours before Shabbat
  • SaturdayClosed (we call back after Shabbat)

Your number stays with us. It's only for calling you back.

Service area

Nearby towns we serve

  • Glen Cove
  • Sea Cliff
  • Glen Head
  • Glenwood Landing
  • Locust Valley
  • Lattingtown
  • Bayville
  • Oyster Bay
  • Roslyn Harbor
  • Old Brookville
Call now Photo